unisonic technologies co., ltd mbr1060c diode www.unisonic.com.tw 1 of 1 copyright ? 2005 unisonic technologies co., ltd qw-r601-019,b schottky barrier rectifier diodes ? features * schottky barrier chip * guard ring die construction for transient protection * low power loss, high efficiency * high surge capability * high current capability and low forward voltage drop * for use in low voltage, high frequency inverters, free * wheeling, and polarity protection applications ? symbol to-220 1 1 to-220f lead-free: mbr1060cl halogen-free: mbr1060cg ? ordering information ordering number pin assignment normal lead free halogen free package 1 2 3 packing mbr1060c-ta3-t mbr1060cl-ta3-t MBR1060CG-TA3-T to-220 a k a tube mbr1060c-tf3-t mbr1060cl-tf3-t mbr1060cg-tf3-t to-220f a k a tube note: pin assignment: a: anode k: cathode
mbr1060c diode unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r601-019,b ? electrical characteristics ratings (ta=25 , unless otherwise specified) parameter symbol ratings unit maximum repetitive peak reverse voltage v rrm 60 v maximum dc blocking voltage v r 60 v working peak reverse voltage v rwm 60 v maximum pms reverse voltage v r(rms) 42 v average forward rectified output current (note 1)(t c =105 ) i out 10 a non-repetitive peak forward surge current 8.3ms single half-sine-wave i fsm 125 a repetitive peak reverse surge current (t p 2.0 s) i rrm 1.0 a i f =5.0a, t c =125 0.70 v i f =5.0a, t c =25 0.80 v forward voltage drop i f =10a, t c =25 v fm 0.95 v t c = 25 0.1 ma peak reverse current at rated dc blocking voltage t c =125 i rm 15 ma typical junction capacitance (note 2) c j 150 pf operating temperature t j -65 ~ +150 storage temperature t stg -65 ~ +150 notes: 1. thermal resistance juncti on to case mounted heat sink. 2. measured at 1.0mhz and appli ed reverse voltage of 4.0v dc. utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
